In stock

Blue Sea 'E' series On/Off double pole battery switch. Surface mounted with the included back box, requiring 4 - 70mm long screws WHICH ARE NOT SUPPLIED. The box has 3 open sides for cable entry, and the 4th (top) side is permanently closed.

THIS SWITCH CAN SWITCH 2 SEPARATE BATTERY CIRCUITS SIMULTANEOUSLY.   SEE WIRING DIAGRAM

Rating: 1000amp cranking up to 10secs, 750amp up to 1 minute, 525amp up to 5 minutes, 350amp continuous, Max 32volt DC.

Ignition protected - safe with petrol engine installations. Fixed non-removable knob.

Full instructions supplied.

Size 98mm x 98mm x 79mm deep overall (including the knob). The mounting box is 40mm deep. When recessed the front projection of the knob is 20mm.

The switch can also be recessed if preferred when the out required is 92.08mm diameter. Max panel thickness 19mm (3/4").

Cable connection studs accept M10 ring terminals (3/8 -16 American thread). Studs are 22mm long allowing multiple terminals to be fitted.

CE marked ISO8846.   UL Listed - UL 1107 electirc power switches. Mets ABYC requirements.   Meets UL1500 and SAE J1171 external ignition protection requirements.   IP66 protects against powerful water jets.

More Information
SKU 8-25510
Write Your Own Review
You're reviewing:350A Blue Sea HD Battery Master Switch, Dual Circuit 'On-Off' 5110E