LED blade fusebox, complete with transparent cover which is marked 'BLADEFUSE'. The body has a small white catch to release the cover.
Consists of 1 x 5mm dia positive power stud which feeds each of the blade fuse circuits. Note this stud is outside the cover when fitted, and is not insulated. Each fuse output has a 6.3mm male blade to accept standard crimp terminals. Each circuit has a red LED which lights up should the fuse fail whilst the circuit is under load (ie if the circuit is switched, and the switch is off, the RED LED will not light up even if the fuse is blown). Note the LED's will NOT illuminate on any unused ways /open circuits regardless of whether a fuse is fitted or not.
Size 35 x 95 x 85mm
4 fixing holes in base under the cover.
NOTE - accepts STANDARD blade fuses, which are NOT included. Fuses must be ordered separately