Single lever mixer tap with chrome body. and chromed plastic straight shower head. The tap lever moves up and down to control flow, and side to side to control temperature. Ceramic valves and seals. The shower head sits in base of tap, and normally the water runs in 'stream' mode, like a tap. The head lifts out on extending 1.5m chrome hose, and can be placed into a wall bracket or riser bar. Pressing the button on the head gives 'spray' for showering. The tap reverts automatically to 'stream' when the pump stops and the pressure drops. The head needs a reasonable minimum water pressure to hold it in the 'spray' position after the button has been pressed. Not advised where the flowrate is poor and cannot build up adequate back pressure.
Tap unit has 3/8" bsp connections.
Shower head has 1/2"bsp male connection.
(upgrade from model MD6501)