In stock

Moulded acrylic corner bowl with high gloss white finish.

Moulded acrylic corner bowl with high gloss white finish. Central hole for waste outlet (not provided, can be ordered separately). Front curved edge has small turned down lip to give nice rounded finish (see photo 2).

Waste fittings can be supplied with straight down outlets or angled outlets, to suit 3/4" or 1.1/4" bore hose. The waste fittings have stainless steel flange, grated waste hole and plug. MUST BE ORDERED SEPARATELY.

The waste fittings recommended are as below.

WAS125 angled for 19mm bore hose

WAS225 straight down for 19mm bore hose

WAS125A angled for 32mm bore hose

WAS225A straight down for 32mm bore hose

All the above waste fittings require the pilot hole to be enlarged to 40mm diameter.

 

Is there room for a tap in the corner?    Please see picture no.3 which shows the space available in the corner of the sink.

 

sizes-

285mm along both straight edges.

Width across the 2 outer corners - approx 403mm

Depth from corner to outside of radius - approx 320mm

Front lip approx 8mm deep weight 230g

More Information
SKU 310174
Write Your Own Review
You're reviewing:Small corner basin 285x285 (11.3"x11.3") white